AISI 4140 / 42CrMo4

AISI 4140EN 42CrMo4 / 1.7225JIS SCM440
Stock statusEx-stock Dubai
Typical lead time2 - 3 working days ex Dubai

The benchmark chromium-molybdenum through-hardening engineering steel. Excellent combination of strength, toughness and machinability in the quenched and tempered condition.

  • Deep hardenability
  • Good machinability in annealed condition
  • Available pre-hardened and stress relieved

Available forms & sizes

FormSize range
Round Bars16 - 800 mm dia, forged or peeled
Plates10 - 200 mm thk
Blocks & ProfilesCut blocks to size

Chemical composition (%)

ElementMinMax
C0.380.43
Cr0.801.10
Mo0.150.25
Mn0.751.00

Mechanical properties

PropertyValueUnit
Yield Strength (Q+T)650 - 900MPa
Tensile Strength (Q+T)900 - 1100MPa
Elongation12 min%
Hardness (Q+T)280 - 320HBW

Physical properties

PropertyValueUnit
Density7.85g/cm3

Typical applications

Drive shafts and axles
Gears and couplings
Drill collars and tool joints
Hydraulic cylinder rods

Frequently asked

[ 02 ] Other grades in Alloy Steel

AISI 4340 / 34CrNiMo6

AISI 4340 / 34CrNiMo6

Mill indent
AISI 4340EN 34CrNiMo6 / 1.6582

Nickel-chromium-molybdenum steel with very high hardenability and toughness in heavy sections, chosen for the most highly stressed machined components.

2 forms available
SA387 Grade 11 Class 2

SA387 Grade 11 Class 2

Mill indent
ASTM / ASME A387 / SA387 Grade 11 Class 2EN 13CrMoSi5-5 / 1.7336

1.25Cr-0.5Mo-Si pressure vessel plate. The silicon addition improves oxidation resistance, making Grade 11 the common choice for hot wall vessels and hydrogen service up to around 550 C where full 2.25Cr strength is not required.

3 forms available
SA387 Grade 12 Class 2

SA387 Grade 12 Class 2

Mill indent
ASTM / ASME A387 / SA387 Grade 12 Class 2EN 13CrMo4-5 / 1.7335

1Cr-0.5Mo pressure vessel plate. The economical Cr-Mo grade for moderate temperature pressure parts, widely used for separator and drum shells where creep and hydrogen resistance are needed but the duty is below the 2.25Cr range.

3 forms available
SA387 Grade 22 Class 2

SA387 Grade 22 Class 2

Mill indent
ASTM / ASME A387 / SA387 Grade 22 Class 2EN 10CrMo9-10 / 1.7380

2.25Cr-1Mo pressure vessel plate — the refinery standard for hydroprocessing. The higher chromium and molybdenum push the Nelson curve limit well above Grade 11, which is why reactors, separators and hot wall equipment in hydrogen service specify it.

3 forms available
SA387 Grade 5 Class 2

SA387 Grade 5 Class 2

Mill indent
ASTM / ASME A387 / SA387 Grade 5 Class 2EN X12CrMo5 / 1.7362

5Cr-0.5Mo plate. The chromium level lifts resistance to sulphidic corrosion and high temperature oxidation, so Grade 5 is specified for crude and vacuum unit hot sections where naphthenic and sulphur attack dominate.

3 forms available
SA387 Grade 9 Class 2

SA387 Grade 9 Class 2

Mill indent
ASTM / ASME A387 / SA387 Grade 9 Class 2EN X11CrMo9-1 / 1.7386

9Cr-1Mo plate for high temperature service. Used where sulphidic corrosion resistance and creep strength have to be carried above the 5Cr range, typically in refinery heaters and transfer line equipment.

3 forms available
Download DatasheetAR