Name: Hardox 600 الصلب المقاوم للتآكل
Brand: SSAB
SKU: hardox-600
Availability: InStock

Question 1

What sizes of Hardox 600 do you stock in Dubai?

Accepted Answer

We hold Hardox 600 in the following forms and size ranges — Plates: 6 - 65 mm thk, Blocks & Profiles: Profile cut wear parts. Cut-to-size, profiling and kitting are available on request, and anything outside the stock range is sourced direct from the mill.

Question 2

What are the equivalent grades to Hardox 600?

Accepted Answer

Hardox 600 is commonly cross-referenced with XAR 600, Abrex 600. Equivalents are nominal: send us the property that matters for your application and we will confirm the closest grade we can certify.

Question 3

Is Hardox 600 supplied with mill certification?

Accepted Answer

Yes. Every delivery of Hardox 600 is supplied against SSAB Hardox guarantee with EN 10204 3.1 mill certification and full heat-number traceability. Third-party inspection can be arranged on request.

Question 4

What is Hardox 600 typically used for?

Accepted Answer

Hardox 600 is specified for extreme abrasion liners, shredder and hammer mill wear parts, slurry handling components, mainly in Mining, Recycling, Cement. Tell us the duty and we will advise whether Hardox 600 or another wear resistant steel grade is the better fit.

الشكل	نطاق المقاسات
الألواح	6 - 65 mm thk
الكتل والمقاطع	Profile cut wear parts

العنصر	الحد الأدنى	الحد الأقصى
C	-	0.47
Cr	-	1.20
Ni	-	2.50
Mo	-	0.70

الخاصية	القيمة	الوحدة
Hardness	570 - 640	HBW
Tensile Strength (typical)	2000	MPa

Hardox 600

الأشكال والمقاسات المتوفرة

التركيب الكيميائي (%)

الخصائص الميكانيكية

الخصائص الفيزيائية

التطبيقات النموذجية

أسئلة متكررة

Hardox 450

Hardox 500