Name: Hardox 500 الصلب المقاوم للتآكل
Brand: SSAB
SKU: hardox-500
Availability: InStock

Question 1

What sizes of Hardox 500 do you stock in Dubai?

Accepted Answer

We hold Hardox 500 in the following forms and size ranges — Plates: 4 - 103 mm thk, up to 3350 mm wide, Blocks & Profiles: Profile cut wear parts. Cut-to-size, profiling and kitting are available on request, and anything outside the stock range is sourced direct from the mill.

Question 2

What are the equivalent grades to Hardox 500?

Accepted Answer

Hardox 500 is commonly cross-referenced with Dillidur 500V, Quard 500, XAR 500. Equivalents are nominal: send us the property that matters for your application and we will confirm the closest grade we can certify.

Question 3

Is Hardox 500 supplied with mill certification?

Accepted Answer

Yes. Every delivery of Hardox 500 is supplied against SSAB Hardox guarantee, EN 10029 with EN 10204 3.1 mill certification and full heat-number traceability. Third-party inspection can be arranged on request.

Question 4

What is Hardox 500 typically used for?

Accepted Answer

Hardox 500 is specified for hard rock crusher liners, grizzly bars and feeders, chute and hopper linings, mainly in Mining, Cement, Quarrying. Tell us the duty and we will advise whether Hardox 500 or another wear resistant steel grade is the better fit.

الشكل	نطاق المقاسات
الألواح	4 - 103 mm thk, up to 3350 mm wide
الكتل والمقاطع	Profile cut wear parts

العنصر	الحد الأدنى	الحد الأقصى
C	-	0.30
Mn	-	1.60
Cr	-	1.50
Ni	-	1.50

الخاصية	القيمة	الوحدة
Hardness	470 - 530	HBW
Yield Strength (typical)	1400	MPa
Tensile Strength (typical)	1550	MPa

Hardox 500

الأشكال والمقاسات المتوفرة

التركيب الكيميائي (%)

الخصائص الميكانيكية

الخصائص الفيزيائية

التطبيقات النموذجية

أسئلة متكررة

Hardox 450

Hardox 600