Question 1

What sizes of Armox 600T do you stock in Dubai?

Accepted Answer

We hold Armox 600T in the following forms and size ranges — Plates: 4 - 20 mm thk, Blocks & Profiles: Profile cut armour panels. Cut-to-size, profiling and kitting are available on request, and anything outside the stock range is sourced direct from the mill.

Question 2

What are the equivalent grades to Armox 600T?

Accepted Answer

Armox 600T is commonly cross-referenced with Mars 300, Ramor 550. Equivalents are nominal: send us the property that matters for your application and we will confirm the closest grade we can certify.

Question 3

Is Armox 600T supplied with mill certification?

Accepted Answer

Yes. Every delivery of Armox 600T is supplied against STANAG 4569, NIJ 0108.01 Level IV with EN 10204 3.1 mill certification and full heat-number traceability. Third-party inspection can be arranged on request.

Question 4

What is Armox 600T typically used for?

Accepted Answer

Armox 600T is specified for weight-critical vehicle armour, add-on appliqué armour packages, ballistic test panels, mainly in Defence, Security. Tell us the duty and we will advise whether Armox 600T or another armor & ballistic steel grade is the better fit.

الشكل	نطاق المقاسات
الألواح	4 - 20 mm thk
الكتل والمقاطع	Profile cut armour panels

العنصر	الحد الأدنى	الحد الأقصى
C	-	0.47
Cr	-	1.50
Ni	-	3.00
Mo	-	0.70

الخاصية	القيمة	الوحدة
Hardness	570 - 640	HBW
Tensile Strength (typical)	2000	MPa
Impact Energy at -40 C	20	J

Armox 600T

الأشكال والمقاسات المتوفرة

التركيب الكيميائي (%)

الخصائص الميكانيكية

الخصائص الفيزيائية

التطبيقات النموذجية

أسئلة متكررة

Armox 500T