Question 1

What sizes of Armox 500T do you stock in Dubai?

Accepted Answer

We hold Armox 500T in the following forms and size ranges — Plates: 3 - 80 mm thk, Blocks & Profiles: Profile cut armour panels to drawing. Cut-to-size, profiling and kitting are available on request, and anything outside the stock range is sourced direct from the mill.

Question 2

What are the equivalent grades to Armox 500T?

Accepted Answer

Armox 500T is commonly cross-referenced with Mars 240, Ramor 500, Protection 500. Equivalents are nominal: send us the property that matters for your application and we will confirm the closest grade we can certify.

Question 3

Is Armox 500T supplied with mill certification?

Accepted Answer

Yes. Every delivery of Armox 500T is supplied against STANAG 4569, NIJ 0108.01 Level III / IV with EN 10204 3.1 mill certification and full heat-number traceability. Third-party inspection can be arranged on request.

Question 4

What is Armox 500T typically used for?

Accepted Answer

Armox 500T is specified for armoured vehicle hulls, cash-in-transit vehicle bodies, security cabins and guard posts, mainly in Defence, Security, Government. Tell us the duty and we will advise whether Armox 500T or another armor & ballistic steel grade is the better fit.

الشكل	نطاق المقاسات
الألواح	3 - 80 mm thk
الكتل والمقاطع	Profile cut armour panels to drawing

العنصر	الحد الأدنى	الحد الأقصى
C	-	0.32
Mn	-	1.20
Cr	-	1.50
Ni	-	1.80

الخاصية	القيمة	الوحدة
Hardness	480 - 540	HBW
Yield Strength (typical)	1250	MPa
Tensile Strength (typical)	1450 - 1750	MPa
Impact Energy at -40 C	32	J

Armox 500T

الأشكال والمقاسات المتوفرة

التركيب الكيميائي (%)

الخصائص الميكانيكية

الخصائص الفيزيائية

التطبيقات النموذجية

أسئلة متكررة

Armox 600T