Question 1

What sizes of UHMW PE1000 do you stock in Dubai?

Accepted Answer

We hold UHMW PE1000 in the following forms and size ranges — Plates: 2 - 100 mm thk, 1000 x 2000 / 1250 x 3000 mm, Blocks & Profiles: Machined liners, strips, rods and wear parts. Cut-to-size, profiling and kitting are available on request, and anything outside the stock range is sourced direct from the mill.

Question 2

What are the equivalent grades to UHMW PE1000?

Accepted Answer

UHMW PE1000 is commonly cross-referenced with PE-UHMW, TIVAR 1000, Polystone M. Equivalents are nominal: send us the property that matters for your application and we will confirm the closest grade we can certify.

Question 3

Is UHMW PE1000 supplied with mill certification?

Accepted Answer

Yes. Every delivery of UHMW PE1000 is supplied against ISO 11542, DIN 16972 with EN 10204 3.1 mill certification and full heat-number traceability. Third-party inspection can be arranged on request.

Question 4

What is UHMW PE1000 typically used for?

Accepted Answer

UHMW PE1000 is specified for chute and hopper linings, silo and bunker linings, conveyor guide rails, mainly in Mining, Cement, Bulk Handling. Tell us the duty and we will advise whether UHMW PE1000 or another uhmw-pe grade is the better fit.

الشكل	نطاق المقاسات
الألواح	2 - 100 mm thk, 1000 x 2000 / 1250 x 3000 mm
الكتل والمقاطع	Machined liners, strips, rods and wear parts

الخاصية	القيمة	الوحدة
Tensile Strength at Yield	17 - 21	MPa
Elongation at Break	> 300	%
Notched Impact Strength	No break	-
Shore D Hardness	62 - 66	-

الخاصية	القيمة	الوحدة
Density	0.93 - 0.94	g/cm3
Max Service Temperature	80	C

UHMW PE1000

الأشكال والمقاسات المتوفرة

التركيب الكيميائي (%)

الخصائص الميكانيكية

الخصائص الفيزيائية

التطبيقات النموذجية

أسئلة متكررة

UHMW PE8000